SSAW ASTM A252 pipes

ASTM A252 standard covers nominal wall cylindrical steel pipe piles in which the steel cylinder acts as a permanent load-carrying member or as a shell to form cast-in-place concrete piles.

Each welded pile shall be made by seamless, electric resistance welding, flash welding or fusion welding with longitudinal, helical-butt, or helical-lap seams. This specification also deals with material tensile requirements, minimum elongation values and common size and weights per unit length values.

SSAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. All the pipes are produced according to API Spec 5L, GB/T9711.1, GB/T9711.2, ASTM A252-89 standard. These pipes mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction.

• O.D.:219-3040mm W.T.:5-30mm
• Steel Grade: ASTM A252 Grade1, Grade2, Grade3
• Standard pipes and tubes for piles, columns, structural and other mechanical uses.
• Piling pipes for low-pressure, high-density purposes

Quality Assurance -- Quality Control

+ Outside Diameter Control
Hydrostatic Testing
+ X-Ray Testing Online

Mill Test Certificate: EN 10204/3.1B 
Third party inspection: SGS, BV, Lloyds etc.